![](http://3.bp.blogspot.com/_rzV4S62B1DA/S10HyErL-EI/AAAAAAAAAK8/6bmU1Frojm4/s200/d32-mod-04.jpg)
I wrote about a
great RF mod for my Kingsley ToneBaron some time ago. It seems that I live in an area where radio interference is quite high. My
Kingsley Deluxe 32 amplifier I recently acquired also suffered from this issue. Luckily, this is an easy fix.
![](http://1.bp.blogspot.com/_rzV4S62B1DA/S10HmgyDVUI/AAAAAAAAAK0/YsFJaUV8Vho/s200/d32-mod-01.jpg)
![](http://2.bp.blogspot.com/_rzV4S62B1DA/S10HJk1sZiI/AAAAAAAAAKk/ye0l13xnVRI/s200/d32-mod-02.jpg)
![](http://1.bp.blogspot.com/_rzV4S62B1DA/S18VkGgDPjI/AAAAAAAAALU/dNuqu8id0XM/s200/d32-mod-03.jpg)
![](http://4.bp.blogspot.com/_rzV4S62B1DA/S10I10wtYwI/AAAAAAAAALE/GXFAc44lcpk/s200/d32-mod-05.jpg)
I had plent
![](http://2.bp.blogspot.com/_rzV4S62B1DA/S18WiStzMjI/AAAAAAAAALc/oSioybGJ81Y/s200/d32-mod-06.jpg)
y of cheap .01 μμF capacitors left over from the last Radio Shack purchase I made to modify my ToneBaron amp. Like the ToneBaron, I used the washer from the closest mini-toggle switch to ground the cap to the chassis and I soldered the other lead of the cap to the T connector (tip) of the input jack. This works very well and virtually eliminates all the RF interference.
No comments:
Post a Comment